Update.. U Joints and Half Shafts are all done. End links are done too.... Still clunking at around 2000 rpm 4th gear, 50 mph +- 5 mph.
Its as if the engine is slapping the driveline..
Driveline in 2nd or 3rd gear is hard to simulate same light load. So, I cant get the noise.
One thing I do know is the left rear shock is blown. Oil all over driveway after pulling in.
Also, car has normal slip when you have foot on brake and put it into gear, forward or reverse. The driveshaft moves, but no clunking etc.
What else is there that can make a clunking slapping noise that isnt half shafts, or driveshafts, end links in this scenario. With 373 gears, I keep it in drive till I hit over 50 mph now. Its that irritating at the mph I discussed.
|